Surkri
Ambernath, Ambarnath, Thane, Maharashtra
GST No. 27AHDPK0176H2ZG
TrustSEAL Verified
Call 0804381528367% Response Rate
SEND EMAIL
| Packaging Type | 26/210 |
| Usage/Application | METAL WORKING FLUID |
Applications: ST Cut is a series of high performance multipurpose neat cutting oils formulated with high quality refined mineral oils and select additives to ensure cost effective machining operations. These non-staining and non-corrosive products are designed for light and moderate duty metal working operations, especially recommended for surface and flute grinding of hardened parts. They are also recommended for machining operations of high tensile stainless steel as well as nickel-chromium alloys on automates, gear cutting, hobbing, drilling/reaming and thread cutting machines. These oils are widely used as an economical replacement of soluble cutting oils for obtaining a better finish on ferrous and non-ferrous metals. Standards: ST Cut series of cutting oils conform to performance specifications as per IS3065: 1985 Type I & II Grade. Advantages: ST Cut series of fluids give superior surface coverage which improves their cooling ability. They impart a better surface finish to metal components after machining and are non-corrosive and non-staining on non-ferrous metals. They help extend service life of the cutting tools.
Applications: ST Cut is a series of high performance multipurpose neat cutting oils formulated with high quality refined mineral oils and select additives to ensure cost effective machining operations. These non-staining and non-corrosive products are designed for light and moderate duty metal working operations, especially recommended for surface and flute grinding of hardened parts. They are also recommended for machining operations of high tensile stainless steel as well as nickel-chromium alloys on automates, gear cutting, hobbing, drilling/reaming and thread cutting machines. These oils are widely used as an economical replacement of soluble cutting oils for obtaining a better finish on ferrous and non-ferrous metals. Standards: ST Cut series of cutting oils conform to performance specifications as per IS3065: 1985 Type I & II Grade. Advantages: ST Cut series of fluids give superior surface coverage which improves their cooling ability. They impart a better surface finish to metal components after machining and are non-corrosive and non-staining on non-ferrous metals. They help extend service life of the cutting tools.
ST Cut 52, 53, 54, 55 and 67 are a premium series of oil formulated with select refined base oils and a combination of high performance additives comprising sulphur, fat and performance chemicals. These oils are designed for lubrication and cooling of metal surfaces in severe operating condition on tough ferrous metals. They are recommended for most metal working operations, e.g. gear cutting, broaching and threading on ferrous metals and alloys, except on non-ferrous and cuprous metals. Standards: ST Cut of grades 52, 53, 54, 55 and 67 conform to IS: 3065: 1985 type 3 Grade III performance standards. Advantages: ST Cut of grades 52, 53, 54, 55 and 67 have proven to be excellent general purpose straight cutting oils with a satisfactory performance over a wide range of machine tool speeds and cutting depths. Their high weld load properties enable machining under the most arduous metal working operations on tough ferrous metals, resulting in longer service life of cutting tools. They impart an excellent surface finish on worked metal components. They cause very low active sulphur drop-outs, leading to sustained EP properties. They are cost-effective in operations, helping to reduce maintenance costs, which in turn has made them industry favourites and reduced the number of cutting oil grades in use.
Loom Oils comprise of a range of lubricants which have been specifically designed for oil loss systems of textile looms. These oils have adequate film forming property and provide better lubrication. These are user friendly. The grades have been formulated to perform well both for boundary as well as full fluid lubrication conditions. Loom Oils are generally suggested for non-critical all loss lubrication systems of textile and other looms which do not require additive containing oil. Loom Oil can also be used for other oiling applications of some equipment.
| Packaging Type | 26 |
| Grade | 400 |
| Unit Pack Size | 26 and 210 ltrs pack |
Iso 45001. 2018 certified hardness 400Cutting Oils, also commonly referred to as coolant, cutting fluid or cutting compound, provides lubrication and cooling during machining processes, rust and corrosion protection as well as aiding in chip removal from the cutting area.
| Packaging Type | Drum |
| Unit Pack Size | 20 Liters |
| Grade | VM 4 |
| Physical State | Liquid |
| Viscosity lndex Min | 95 |
| Minimum Order Quantity | 20 Litre |
Gear Oils XS is a series of fully synthetic heavy-duty industrial oils designed for spur, helical, bevel gear and bearing in industrial equipment as well as ships with heavy loads and under harsh environment conditions. These gear oils are especially recommended for applications that require long service life, get little maintenance or have a very difficult maintenance system. They are also suitable for reduction gearbox of conveyor, coal mill, extruder, blender mixer and other heavy equipment gearbox used in steel, cement, coal, power, petrochemical and paper industries. They serve well even when used for marine propeller, deck winch, crane, steering gear, the reducer of excavator, dragline, electric-wheeled self-dumping trucks and other equipment in open-pit coal mines. Standards: Each grade in the Gear Oils XS series conforms to performance standards of DIN 51517 Part III (2014); ISO 12925-1 Type CKC/ CKD; AGMA EP 9005-EO2 (EP); AISE (US STEEL): 224; David Brown S1.53.101 and FLENDER GEAR BOXES – REVISION 9. Advantages: Gear Oils in the XS series have a high viscosity index which enables reliable and trouble-free operation even in harsh environmental conditions. Besides thermal stability they also have exceptional oxidation inhibition properties. Their unique antimicro-pitting ability for gear sets reduces the risk of premature damage. Their excellent seal compatibility, next generation additives, load carrying capacity, adequate demulsibility and superior anti-rust, anti-corrosion properties add up into effective protection and therefore longer service life of the gear.
Anti-Rust DW Preventives are a series of oils designed for use in the manufacture of nuts, bolts, HSS bearings, steel tubes, bars, tool-bits, tools and other small components for in-process protection. The oils work by effectively displacing moisture and protecting these machine parts from rust and corrosion. Anti-Rust DW Preventives are a specially formulated blend comprising superior quality hydrocarbon solvents, refined base oils and high-performance rust inhibitor additives. It protects steel against high humidity and extreme corrosive environments. The treated parts remain well protected for 9 to 12 months if indoors and 3 to 6 months if outdoors.
Anti-Rust DW 173 has excellent properties for preventing finger print corrosion and is ideal for use on highly polished precision parts.
Advantages: Each blend in the range of Anti Rust DW Preventives effectively prevents incipient rusting and corrosion (even in small cast iron parts). The rust protective film has see-through property and can be easily removed by using kerosene or any other petroleum solvent. The oil shows high surface coverage and hence helps in lowering cost.
Turbol T grades T32, T46 and T68 are premium quality turbine oils for turbines and hydraulic systems that require very long drain intervals and a dependable lubricant with effective anti-wear properties. These turbine oils are recommended for lubrication of turbo-compressors and suitable also for lubrications of plain as well as journal type bearings in steam, gas and hydraulic turbines. Standards: Turbol T grade turbine oils are manufactured from high quality paraffinic base stock. These oils conform to performance standards of IS-1012-2002 (Reaffirmed to 2013); BS: 489-1983; OEM: BHEL and GE turbine specifications; German Standard DIN 51515; and General Electric GEK 27070. Advantages: Turbol T grade turbine oils possess very high oxidation and chemical stability to resist corrosive action. They also have excellent demulsibility, antifoaming and anti-wear properties that provide effective protection from rust and corrosion. These oils enable the release of entrained air from the system, thus preventing possible cavitations, air locks, etc. which usually affect turbine performance. These advantages add up to high thermal stability and in turn longer service life of the system.
| Grade | 20W42 |
| Usage/Application | Automotive |
| Packaging Type | Can |
| Form Type | Liquid |
| Minimum Order Quantity | 10 Can |
Entro ZF-32, ZF-46 and ZF-68 hydraulic oils are premium grade zinc-free, ash-less lubricants specially formulated for severely stressed systems that require high levels of anti-wear performance. These oils are recommended for high pressure hydraulic systems, pumps and industrial hydraulic machines operating at high speeds, loads and temperatures. They are widely used also in sophisticated high performance electro-hydraulic or numerically controlled systems found in concrete mixing units in construction applications. The product is especially suitable for applications involving yellow metals found in hydraulic pumps/hydraulic systems. Standards: Entro ZF-32, ZF-46 and ZF-68 hydraulic oils are formulated with paraffinic, high viscosity index, low pour point mineral oil. The blend is further augmented with high performance additives including a special ashless multifunctional oxidation, rust and wear inhibiting additives package. These ingredients give the product greater chemical stability even under severe operating conditions. They conform to performance specifications as per Cincinnati Milacron P69, P70; DIN 51524 Part II; Bosch Rexroth RE 90220; ISO: 11158 [HM]; Parker HF-0, HF-1, HF-2 [HM]; SAE MS 1004 [HM]; and ASTM D6158. Advantages: Entro ZF-32, ZF-46 and ZF-68 hydraulic oils have no ZnDTP or zinc. The blends also contain a low phosphorous and low sulphur EP/AW additive package. These ingredients impart excellent hydrolytic stability, demulsibility, filterability, anti-foaming and air release properties. These qualities in turn ensure ashless performance besides effective protection against wear, corrosion, resisting emulsification and any formation of unwanted stable foam. Consequently, they help extend service life of the hydraulic systems. These oils are also compatible with calcium and zinc containing fluids.
Applications: Gun Drilling Oils 1, 1A, 1F and 2 are heavy-duty oil blends recommended for deep hole drilling, boring, broaching, gun drilling, tapping, milling, threading and honing operations of cast iron, steel and high-speed steel alloys. These oils are also used in machine tool industries, vertical machining centers, conventional lathe machine, milling and radial drilling machine and in multi spindle drilling. These oils were specially formulated to meet the higher performance levels required by some machine manufacturers and end-users. The high loading conditions encountered in the working of ferrous metals required the use of highly effective additives which have been incorporated in this formulation. Each grade in it comprises low viscosity base oils and select additives for required oiliness, extreme pressure performance and quick chip removal. Their low viscosity and the consequent higher thermal conductivity help maintain the tool edge temperatures within limits, thus ensuring better job finish and longer service life of tools. Advantages: Gun Drilling Oils 1, 1A, 1F and 2 enable reduced friction and good anti-weld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts. They enable excellent performance in the most difficult machining operations and also permit clear view of the work piece.
Applications: Gun Drilling Oils 1, 1A, 1F and 2 are heavy-duty oil blends recommended for deep hole drilling, boring, broaching, gun drilling, tapping, milling, threading and honing operations of cast iron, steel and high-speed steel alloys. These oils are also used in machine tool industries, vertical machining centers, conventional lathe machine, milling and radial drilling machine and in multi spindle drilling. These oils were specially formulated to meet the higher performance levels required by some machine manufacturers and end-users. The high loading conditions encountered in the working of ferrous metals required the use of highly effective additives which have been incorporated in this formulation. Each grade in it comprises low viscosity base oils and select additives for required oiliness, extreme pressure performance and quick chip removal. Their low viscosity and the consequent higher thermal conductivity help maintain the tool edge temperatures within limits, thus ensuring better job finish and longer service life of tools. Advantages: Gun Drilling Oils 1, 1A, 1F and 2 enable reduced friction and good anti-weld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts. They enable excellent performance in the most difficult machining operations and also permit clear view of the work piece.
Applications: Gun Drilling Oils 1, 1A, 1F and 2 are heavy-duty oil blends recommended for deep hole drilling, boring, broaching, gun drilling, tapping, milling, threading and honing operations of cast iron, steel and high-speed steel alloys. These oils are also used in machine tool industries, vertical machining centers, conventional lathe machine, milling and radial drilling machine and in multi spindle drilling. These oils were specially formulated to meet the higher performance levels required by some machine manufacturers and end-users. The high loading conditions encountered in the working of ferrous metals required the use of highly effective additives which have been incorporated in this formulation. Each grade in it comprises low viscosity base oils and select additives for required oiliness, extreme pressure performance and quick chip removal. Their low viscosity and the consequent higher thermal conductivity help maintain the tool edge temperatures within limits, thus ensuring better job finish and longer service life of tools. Advantages: Gun Drilling Oils 1, 1A, 1F and 2 enable reduced friction and good anti-weld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts. They enable excellent performance in the most difficult machining operations and also permit clear view of the work piece.
Applications: Gun Drilling Oils 1, 1A, 1F and 2 are heavy-duty oil blends recommended for deep hole drilling, boring, broaching, gun drilling, tapping, milling, threading and honing operations of cast iron, steel and high-speed steel alloys. These oils are also used in machine tool industries, vertical machining centers, conventional lathe machine, milling and radial drilling machine and in multi spindle drilling. These oils were specially formulated to meet the higher performance levels required by some machine manufacturers and end-users. The high loading conditions encountered in the working of ferrous metals required the use of highly effective additives which have been incorporated in this formulation. Each grade in it comprises low viscosity base oils and select additives for required oiliness, extreme pressure performance and quick chip removal. Their low viscosity and the consequent higher thermal conductivity help maintain the tool edge temperatures within limits, thus ensuring better job finish and longer service life of tools. Advantages: Gun Drilling Oils 1, 1A, 1F and 2 enable reduced friction and good anti-weld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts. They enable excellent performance in the most difficult machining operations and also permit clear view of the work piece.
Wire MET 44 oil is a non-staining, water-soluble cream used for deep drawing of copper wires, tube drawing, forming, spinning and other similar medium to heavy duty operations on carbon steels and nonferrous metal. It is a whitish cream paste for ‘dry on’ or emulsion application. The product is a specially balanced mixture of soap and fat. For application, it has to be diluted with water in a recommended ratio of between 1 to 5% depending upon the gauge of the wire to be drawn. Advantages: Wire MET 44 metal drawing compound has excellent film strength and cooling ability
Anti-Rust DW Preventives are a series of oils designed for use in the manufacture of nuts, bolts, HSS bearings, steel tubes, bars, tool-bits, tools and other small components for in-process protection. The oils work by effectively displacing moisture and protecting these machine parts from rust and corrosion. Anti-Rust DW Preventives are a specially formulated blend comprising superior quality hydrocarbon solvents, refined base oils and high-performance rust inhibitor additives. It protects steel against high humidity and extreme corrosive environments. The treated parts remain well protected for 9 to 12 months if indoors and 3 to 6 months if outdoors.
Anti-Rust DW 173 has excellent properties for preventing finger print corrosion and is ideal for use on highly polished precision parts.
Anti-Rust DW Preventives are a series of oils designed for use in the manufacture of nuts, bolts, HSS bearings, steel tubes, bars, tool-bits, tools and other small components for in-process protection. The oils work by effectively displacing moisture and protecting these machine parts from rust and corrosion. Anti-Rust DW Preventives are a specially formulated blend comprising superior quality hydrocarbon solvents, refined base oils and high-performance rust inhibitor additives. It protects steel against high humidity and extreme corrosive environments. The treated parts remain well protected for 9 to 12 months if indoors and 3 to 6 months if outdoors.
Anti-Rust DW 801/802 are solvent based exclusive products with soft film and meeting humidity cabinet control test exceeding 7 days indicating excellent salt spray protection.Advantages: Each blend in the range of Anti Rust DW Preventives effectively prevents incipient rusting and corrosion (even in small cast iron parts). The rust protective film has see-through property and can be easily removed by using kerosene or any other petroleum solvent. The oil shows high surface coverage and hence helps in lowering cost.
Anti-Rust DW Preventives are a series of oils designed for use in the manufacture of nuts, bolts, HSS bearings, steel tubes, bars, tool-bits, tools and other small components for in-process protection. The oils work by effectively displacing moisture and protecting these machine parts from rust and corrosion. Anti-Rust DW Preventives are a specially formulated blend comprising superior quality hydrocarbon solvents, refined base oils and high-performance rust inhibitor additives. It protects steel against high humidity and extreme corrosive environments. The treated parts remain well protected for 9 to 12 months if indoors and 3 to 6 months if outdoors.
Anti-Rust DW 803/804 are recommended for protection of parts from machines using water-soluble oils and synthetic oils as coolants.
Advantages: Each blend in the range of Anti Rust DW Preventives effectively prevents incipient rusting and corrosion (even in small cast iron parts). The rust protective film has see-through property and can be easily removed by using kerosene or any other petroleum solvent. The oil shows high surface coverage and hence helps in lowering cost.
Anti-Rust DW Preventives are a series of oils designed for use in the manufacture of nuts, bolts, HSS bearings, steel tubes, bars, tool-bits, tools and other small components for in-process protection. The oils work by effectively displacing moisture and protecting these machine parts from rust and corrosion. Anti-Rust DW Preventives are a specially formulated blend comprising superior quality hydrocarbon solvents, refined base oils and high-performance rust inhibitor additives. It protects steel against high humidity and extreme corrosive environments. The treated parts remain well protected for 9 to 12 months if indoors and 3 to 6 months if outdoors.
Anti-Rust DW 803/804 are recommended for protection of parts from machines using water-soluble oils and synthetic oils as coolants.
Advantages: Each blend in the range of Anti Rust DW Preventives effectively prevents incipient rusting and corrosion (even in small cast iron parts). The rust protective film has see-through property and can be easily removed by using kerosene or any other petroleum solvent. The oil shows high surface coverage and hence helps in lowering cost.
Applications: Oil Based Rust Preventives OB 60, 62, 65, 66 and 72 are premium quality rust preventives designed to protect metal surfaces from rust and corrosion. The blend is formulated using light bodied base oil with polar rust preventing additives. Anti-Rust OB 62 is a protective oil of very low viscosity suitable for highly finished precision parts such as ball bearings, etc. Anti-Rust OB 65 is a low-viscosity protective oil ideal for use in fuel pumps as also for short term protection in situations exposed to weather changes. Anti-Rust OB 66 is an SAE 50 oil suitable for protection of internal combustion engines and reciprocating type air compressors during laying up period or during shipment overseas. Advantages: Oil Based Rust Preventives are compatible with the lubricant and need not be removed before operating the machine. They can cover a large surface area, hence they also prove to be economical in use. The protective oil film can be easily removed when required.
Applications: Oil Based Rust Preventives OB 60, 62, 65, 66 and 72 are premium quality rust preventives designed to protect metal surfaces from rust and corrosion. The blend is formulated using light bodied base oil with polar rust preventing additives. Anti-Rust OB 62 is a protective oil of very low viscosity suitable for highly finished precision parts such as ball bearings, etc. Anti-Rust OB 65 is a low-viscosity protective oil ideal for use in fuel pumps as also for short term protection in situations exposed to weather changes. Anti-Rust OB 66 is an SAE 50 oil suitable for protection of internal combustion engines and reciprocating type air compressors during laying up period or during shipment overseas. Advantages: Oil Based Rust Preventives are compatible with the lubricant and need not be removed before operating the machine. They can cover a large surface area, hence they also prove to be economical in use. The protective oil film can be easily removed when required.
Applications: Oil Based Rust Preventives OB 60, 62, 65, 66 and 72 are premium quality rust preventives designed to protect metal surfaces from rust and corrosion. The blend is formulated using light bodied base oil with polar rust preventing additives. Anti-Rust OB 62 is a protective oil of very low viscosity suitable for highly finished precision parts such as ball bearings, etc. Anti-Rust OB 65 is a low-viscosity protective oil ideal for use in fuel pumps as also for short term protection in situations exposed to weather changes. Anti-Rust OB 66 is an SAE 50 oil suitable for protection of internal combustion engines and reciprocating type air compressors during laying up period or during shipment overseas. Advantages: Oil Based Rust Preventives are compatible with the lubricant and need not be removed before operating the machine. They can cover a large surface area, hence they also prove to be economical in use. The protective oil film can be easily removed when required.
Applications: Oil Based Rust Preventives OB 60, 62, 65, 66 and 72 are premium quality rust preventives designed to protect metal surfaces from rust and corrosion. The blend is formulated using light bodied base oil with polar rust preventing additives. Anti-Rust OB 62 is a protective oil of very low viscosity suitable for highly finished precision parts such as ball bearings, etc. Anti-Rust OB 65 is a low-viscosity protective oil ideal for use in fuel pumps as also for short term protection in situations exposed to weather changes. Anti-Rust OB 66 is an SAE 50 oil suitable for protection of internal combustion engines and reciprocating type air compressors during laying up period or during shipment overseas. Advantages: Oil Based Rust Preventives are compatible with the lubricant and need not be removed before operating the machine. They can cover a large surface area, hence they also prove to be economical in use. The protective oil film can be easily removed when required.
Applications: Oil Based Rust Preventives OB 60, 62, 65, 66 and 72 are premium quality rust preventives designed to protect metal surfaces from rust and corrosion. The blend is formulated using light bodied base oil with polar rust preventing additives. Anti-Rust OB 62 is a protective oil of very low viscosity suitable for highly finished precision parts such as ball bearings, etc. Anti-Rust OB 65 is a low-viscosity protective oil ideal for use in fuel pumps as also for short term protection in situations exposed to weather changes. Anti-Rust OB 66 is an SAE 50 oil suitable for protection of internal combustion engines and reciprocating type air compressors during laying up period or during shipment overseas. Advantages: Oil Based Rust Preventives are compatible with the lubricant and need not be removed before operating the machine. They can cover a large surface area, hence they also prove to be economical in use. The protective oil film can be easily removed when required.
Turbol 32, 46, 57 and 68 are premium quality turbine oils designed for turbines and hydraulic systems that require a very long drain interval with a dependable lubricant. These oils are recommended for lubrication of turbo-compressors and suitable also for lubrications of plain as well as journal type bearings in steam, gas and water turbines. Standards: Turbol turbine oils are formulated using high quality paraffinic base stock. Each grade of Turbo oils meet OEM turbine specifications as per BHEL and GE. They also conform to IS:1012-2002 (Reaffirmed to 2013), BS:489-1983 and German Standard DIN 51515 Part I. Advantages: Turbol turbine oils possess very high oxidation and chemical stability to resist corrosive action. They also have excellent demulsibility, antifoaming and anti-wear properties that provide effective protection from rust and corrosion. These oils also enable the release of entrained air from the system, thus preventing possible cavitations, air locks, etc. which usually impact turbine efficiency. These advantages add up to high thermal stability and in turn longer service life of the system.
